Xerox CopyCentre C20 Page 48 User Manual Download

Page: 48 / 215

Page 2-24

Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide

Getting Star

Driver Installation

Before direct printing, direct scanning or using ControlCentre through the

Parallel Port

or the

USB

port, you will need to install a driver.

The procedure will install the driver and configure it for the local port.

To install the driver on the workstation.

Insert the

Driver CD

into the CD drive.

Within a few seconds, the CD should start automatically and present you with the opening
screen. If this does not happen, go to the

Start

menu, select [Run] and browse to the CD

drive. Select [Setup] and click [OK]. Click [OK] to start the installation procedure.

Select the language for the installation and select [Continue].

The driver screen is displayed.

Check the boxes for the drivers required,

PostScript

PCL

PC Scan

and

ControlCentre

Select [Continue].

You can choose to install as many drivers as you require by checking the appropriate boxes.

Summary of Contents for CopyCentre C20
























































































































































































































Search results

Summary of Contents for CopyCentre C20

Reviews:

Related manuals for CopyCentre C20

Brands by name

Popular brands

Xerox CopyCentre C20, User Manual

Search results

Summary of Contents for CopyCentre C20

Reviews:

Related manuals for CopyCentre C20

Brands by name

Popular brands