Create/edit an Alignment profile
Use the following procedure to create a new or edit an existing Alignment profile for
adjusting side 1/side 2 image output.
Tip
It is recommended that you choose only one Alignment profile feature (such as skew),
and then run a set of test prints to evaluate the skew on that output. If you want to
adjust multiple Alignment profile features, individually select each feature, run some
test prints for that feature, and evaluate the output. After you determine that the output
for the selected feature is acceptable, then you can select another Alignment profile
feature to adjust.
1. Logon as Administrator.
2. Select the Profiles button.
The Profiles window opens.
3. Ensure that the Alignment tab is displayed.
Alignment should be first tab displayed after selecting the Profiles button from the
main UI.
4. Select New or Edit to create a new alignment profile or to edit/modify an existing
Alignment profile.
Either the New Profile Properties or the Edit Profile Properties window opens.
5. If desired, enter a new name or modify the existing name.
6. Select/edit an Alignment profile option (Registration, Perpendicularity, Skew, or
Magnification), and make the desired selections for that option.
Tip
When making adjustments to multiple items, adjust the image in the following order:
Perpendicularity adjustment, then Skew adjustment, then Magnification adjustment,
and finally Registration adjustment.
Xerox
®
Color 800/1000 Press
6-10
System Administration Guide
Profiles
