3. To change the position of a feature, select the feature, then use the arrows.
4. When finished, touch
OK
.
SShhoow
wiinngg,, LLoocckkiinngg,, aanndd H
Hiiddiinngg C
Cooppyy FFeeaattuurreess oonn tthhee
C
Coonnttrrooll PPaanneell
You can select the features to appear on the control panel and lock settings to prevent change.
To set controls for copy features:
1. At the printer control panel, press the
Machine Status
button.
Note:
To access this feature at the control panel, log in as an administrator.
2. Touch
Service Settings
→
Copy
→
Show / Lock / Hide Features
.
3. Touch a feature, then select an option.
4. When finished, touch
OK
.
C
Chhaannggiinngg tthhee PPaappeerr SSuuppppllyy A
Auuttoo SSeelleecctt PPoolliiccyy aatt tthhee
C
Coonnttrrooll PPaanneell
If Paper Supply Auto Select is set to On, the printer selects the most appropriate size paper tray when
there is no exact match for the copy job. If Paper Supply Auto Select is set to Off, the printer hides
the Auto Select option, and the default paper selection is set to Tray 1.
To set the Paper Supply Auto Select policy:
1. At the printer control panel, press the
Machine Status
button.
Note:
To access this feature at the control panel, log in as an administrator.
2. Touch
Service Settings
→
Copy
→
Paper Supply Auto Select Policy
.
3. Select
On
or
Off
, then touch
OK
.
C
Chhaannggiinngg tthhee RReedduuccee//EEnnllaarrggee PPrreesseettss oonn tthhee C
Coonnttrrooll
PPaanneell
To set the Reduce/Enlarge presets:
1. At the printer control panel, press the
Machine Status
button.
Note:
To access this feature at the control panel, log in as an administrator.
2. Touch
Service Settings
→
Copy
→
Reduce / Enlarge Presets
.
3. To change a preset, touch an existing preset, then touch the left or right arrow buttons.
4. To restore the original values, touch
Reset All
.
5. After you have changed your presets, touch
OK
.
Xerox
®
B1025 Multifunction Printer
System Administrator Guide
77
