Xerox B1025, System Administrator Manual

Page: 24 / 123

SNMP
Simple Network Management Protocol (SNMP) is a set of network protocols designed to allow you to
manage and monitor devices on your network.
You can use the SNMP configuration pages in Xerox ® CentreWare ® Internet Services to:
• Enable or disable Authentication Failure Generic Traps.
• Enable SNMPv3 to create an encrypted channel for secure printer management.
• Assign privacy, authentication protocols, and keys to Administrative and key user accounts.
• Assign read and write access to User accounts.
• Limit SNMP access to the printer using hosts.
EEnnaabblliinngg SSN NM MPP
1. In Xerox ® CentreWare ® Internet Services, click Properties → Connectivity → Protocols .
2. Click SNMP .
3. For Protocol, select Enable .
4. Click Apply .
SSN NM MPP A Addvvaanncceedd SSeettttiinnggss
You can add, edit, or delete IP addresses for Network Management workstations that receive traps
from the device.
C Coonnffiigguurriinngg SSN NM MPP A Addvvaanncceedd SSeettttiinnggss
1. In Xerox ® CentreWare ® Internet Services, click Properties → Connectivity → Protocols .
2. Click SNMP .
3. Click Add IP Address .
4. For IP Trap Destination Address, type the IP address of the host running the SNMP manager that
receives traps.
5. Type the UDP Port Number.
6. To add the traps, perform the following steps.
• For TRAP Community Name, type a name.
• For Traps to be Received, select the type of traps that the SNMP manager receives.
7. Click Apply .
24 Xerox ® B1025 Multifunction Printer
System Administrator Guide
Network Connectivity