Xerox apeosport 350 I, Network Administration Manual

Page: 73 / 160

Network Setting Items (Port/Protocol) for CentreWare Internet Services
71
Using CentreWare
Internet Services
10
Parallel
This section describes the settings for the parallel interface.
1
Start a web browser.
2
Enter the machine's IP address or the Internet address to the address entry column on
the web browser, and press the <Enter> key.
z
Example of the IP address entry
http://192.168.1.1/
z
Example of the Internet address entry
http://xxx.yyyy.zz.vvv/
Note • When specifying a port number, add “:” and a port number to the end of the Internet address.
3
Click the [Properties] tab.
4
Click [+] on the left of [Port Settings] to display the items in the folder.
5
Click [Parallel].
6
Select the [Enable] check box to enable [Bi-Directional Communications].
7
Set [Auto Eject Time].
8
Set the protocol using the [Adobe Communications Protocol] pull-down menu.
Note • Adobe Communication Protocol can be set only when an optional PostScript 3 Kit is
installed.
9
Reflect the values as the machine's setting values.
1) Click the [Apply New Settings]. A screen to enter the user name and password will
be displayed.
2) Enter the System Administrator user ID and password into [User Name] and
[Password], and then click [OK].
Note • The default user ID is “11111” and password is “x-admin”.
3) The right frame on the web browser will change to the machine reboot display.
4) Click [Reboot]. The machine will reboot and the setting value will be reflected.