Setting up Netmask
1. Select the Services button on the Control Panel, followed by Machine Info
> Administration Tab > Network Setup.
2. Select Netmask from the Network Setup screen.
The IP Netmask screen displays.
3. Enter the Subnet Mask in the format XXX.XXX.XXX.XXX.
4. Select Enter.
The Network Setup screen displays.
5. Select Save.
Setting up DHCP
If you are unaware of the IP Address, Gateway, or Subnet Mask information, you can
utilize the Dynamic Host Configuration Protocol (DHCP) option. When this box is checked
(enabled), the network interface utilizes the DHCP to acquire a temporary IP Address
for the networked device from a client that is supplying DHCP services on the network.
Since constantly changing IP addressing can cause problems for users in network
communications, the default value for this feature is not checked (disabled).
1. Select the Services button on the Control Panel, followed by Machine Info
> Administration Tab > Network Setup.
3-23
Xerox
®
6279
®
Wide Format Solution
Printer User Guide
System Administration
Summary of Contents for 6279
Page 82: ...Xerox 6279 Wide Format Solution 4 14 Printer User Guide Machine Information...
Page 123: ......
Page 124: ......
