Setting the Date and Time
The administrator sets the date and time that displays on the Touch Screen and also
on controller-generated prints (banner sheets, reports, error messages, etc.) The machine
uses a 24 hour clock (0 - 23).
1. Select Machine Information from the Services menu.
2. Select the Administration tab.
Refer to the Machine Information chapter for more details on the feature.
3. Select General Administration from the Administration tab.
NOTE
If you are logged out, the system prompts you to log in as a System
Administrator.
4. Select Set the date and time...
5. Enter the following:
• Year
• Month
• Day
• Hour
• Minute
6. Select Save.
7. Select Close on the General Administration screen to return to the Administration
tab screen.
Changing the Administrator Password
The following describes the procedure for changing the System Administrator password.
This is the same system password that is required when accessing the machine from the
Web Printer Management Tool.
If required, create a new system password immediately after machine installation and
periodically thereafter. Be sure to record the password in a secure location.
NOTE
The password can contain one to five numbers, from 0 to 99999.
1. Select Machine Info from the Services menu.
The Machine Information screen displays.
2. Select the Administration tab.
3. Select General Administration.
The General Administration screen displays.
4. Select Change The Administrator Password....
3-5
Xerox
®
6279
®
Wide Format Solution
Printer User Guide
System Administration
Summary of Contents for 6279
Page 82: ...Xerox 6279 Wide Format Solution 4 14 Printer User Guide Machine Information...
Page 123: ......
Page 124: ......
