Using Dynamic Job Descriptor Entries (DJDEs)
5-74
Using LCDS Print Description Language
XSHIFT DJDE
Specifies whether the image of the form and data on a page is to
be shifted, and if so, by what values. This DJDE shifts the data
downward (in the
x
direction) for short edge binding, because a
long edge feed page is viewed in portrait mode. It is typically
used to accommodate top drilled paper, binding, finishing, and
edgemarking.
Type
Page oriented
Syntax
XSHIFT = {YES | NO | (
v
1
,
v
2
)}
Options
Table 5-64. XSHIFT DJDE options and definitions
Option
Definition
v
1
value 1
An integer value in dots for the amount of shift on the simplex page or the odd
(front) side of the duplex page. (Each dot is 1/300 of an inch.)
The range for
v
1
is –75 to 75.
v
2
value 2
A value in dots for the amount of shift on the even (back) side of a duplex page.
The range for
v
2
is –75 to 75.
YES
Specifies that a shift occurs. A standard size shift occurs if YES is specified
(
v
1
=75 and
v
2
= 75).
NO
Specifies that no shift occurs (
v
1
=0 and
v
2
=0).
Summary of Contents for 6100BD - Phaser Color Laser Printer
