Specifying input parameters
Using LCDS Print Description Language
2-69
Options
Default
EBCDIC
VOLUME UNPACK
Specifies the unpacking method of the input data when
unpacking is required.
Syntax
VOLUME UNPACK = {NONE | T4X3 | T4X3H2 | UNIVAC}
Options
Default
NONE
Table 2-77. VOLUME TCODE parameter options and definitions
Option
Definition
tcode Type
Specifies one of the following standard character sets for which type
assignments are defined by default:
•
ASCII
•
BCD
•
EBCDIC
•
H2BCD
•
H6BCD
•
IBMCD
•
PEBCDIC
By coding any one of the keywords, you are furnished with a set of character to
type assignments.
label
Specifies an identified label of a TCODE parameter that defines a set of type
assignments.
Table 2-78. VOLUME UNPACK parameter options and definitions
Option
Definition
NONE
Does not perform the unpacking operation.
T4X3 or
T4X3H2
Specifies unpacking routines in which 6-bit characters are extracted and
restored as 8-bit bytes.
UNIVAC
Specifies an unpacking routine used for UNIVAC tapes, although you can
specify any of these routines independent of the HOST type.
Summary of Contents for 6100BD - Phaser Color Laser Printer
