Specifying print format parameters
Using LCDS Print Description Language
4-45
OUTPUT BFORM
Prints a form on the back side of a duplex data sheet. In
association with the duplex printing mode DUPLEX=YES, a
page containing only a form (no variable data can be printed with
this page) may be printed on the back side of a data sheet. This
feature can be used to print static data on the back of each sheet
in a report without the use of DJDEs or the repetitive processing
of that static data for the back sides of successive sheets.
Syntax
OUTPUT BFORM = {NONE | (
formid
[,
init
[,
copies
]]
[, (INKS,
inkref
1
[,
inkref
2
] ...)])}
Options
OUTPUT STAPLE
Places a wire stitch in copied sets of output.
Y
Y
N
OUTPUT STOCKS
Specifies a STOCKSET for use in the report.
Y
Y
Y
OUTPUT SYSPPR
Specifies the system page paper size for a
job.
Y
Y
N
OUTPUT TMODE
Specifies a maximum paper width in order to
improve throughput efficiency when mixed
paper sizes are used.
NOTE: This feature is not supported for the
Nuvera MX systems.
Y
Y
Y
OUTPUT TRANS
Specifies that transparencies are used in the
job.
Y
Y
N
OUTPUT UNITS
Specifies user selected units for positioning
graphics.
Y
Y
N
OUTPUT XSHIFT
Shifts the image upward or downward on the
page.
Y
Y
Y
Table 4-42. Summary of OUTPUT command parameters (Continued)
Parameter
Specifies
Online
Offline
DJDE
Table 4-43. BFORM parameter options and definitions
Option
Definition
formid
Specifies the name of the back form – a one to six character form file name
(may be numeric, alpha, or alphanumeric), which exists on the system disk.
init
initial copy
.
Specifies the first copy set on which the BFORM will be placed.
copies
Specifies the numbers of copy sets that will contain the BFORM.
Summary of Contents for 6100BD - Phaser Color Laser Printer
