manualshive.com logo in svg

Xerox 6100BD - Phaser Color Laser Printer, Software Manual

Share
Download
Xerox 6100BD - Phaser Color Laser Printer Software Manual Download Page 96

PDL principles and procedures

1-70

Using LCDS Print Description Language

Correcting errors in a JSL

If errors are encountered in a JSL while it is being compiled, the 
following message appears in the Terminal window:

**********JSL CONTAINS ERROR(S)**********

Figure 1-20. Terminal window displaying compiling 
messages for a JSL with errors

The system does not create a .JDL file in the “lcds” folder, but it 
does create a .LST file, which shows where the errors are. 

1. Open and inspect the .LST file to locate the errors that 

prevented the JSL from compiling. 
To open a .LST file: 
a. Open a UNIX Text Editor window. Refer to the “Full JSL 

coding procedure” earlier in this chapter for instructions.

b. From the File menu on the Text Editor window, select 

[Open] to display the Text Editor – Open a File window.    

Summary of Contents for 6100BD - Phaser Color Laser Printer



























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands