Using logical processing
Using LCDS Print Description Language
3-37
Figure 3-4. Illustration of RDELETE command usage
1. Tape mark, followed by interblock gap (IBG)
2. Block 1, followed by interblock gap (IBG)
3. Block 2, followed by interblock gap (IBG)
4. Tape mark
5. Record length field (in preamble)
6. Printer carriage control (PCC) byte (at start of user portion of
record)
7. Print line
8. 103 bytes of data
RFEED command
The logical processing RFEED command allows you to change
stock names on a page by page basis without using DJDEs. The
RFEED command allows you to specify paper fed from trays
assigned to different stocks if certain record criteria are met.
RFEED, an extension of the RAUX command, lets you specify
virtually any
stock name
or
stock reference
without being limited
to the AUX stock.
The following section describes the syntax of the RFEED
command parameter and explains its options.
RFEED TEST parameter
Allows you to specify paper fed from trays assigned to different
stocks if certain record criteria are met.
Syntax
RFEED TEST = ((
testexp
,
stock
) [, ...])
Summary of Contents for 6100BD - Phaser Color Laser Printer
