Specifying input parameters
Using LCDS Print Description Language
2-19
Figure 2-1. Sample BLOCK command diagram
CODE command
Defines a character code translation table.
When you require a user defined character code translation
table, you define the character translation using this command,
then reference the CODE command using the VOLUME CODE
parameter. As an alternative, you can use the USER option of
the VOLUME CODE parameter to reference the CODE
command for which no identifier was provided.
ac identifier
A command identifier of the type
ac
is optional for the
first
CODE command within a JDE. Thereafter, each additional
CODE command
must
include the identifier. The
ac
identifier
consists of 1 to 6 alphanumeric characters (A through Z and 0
through 9). One of the characters must be alphabetic.
CODE command parameters
The following table summarizes the CODE command
parameters.
Table 2-15. Summary of CODE command parameters
Parameter
Specifies
Online
Offline
DJDE
CODE ASSIGN
Defines user code assignments.
Y
Y
N
CODE DEFAULT
Specifies a base code from which character
code assignment exceptions can be made.
Y
Y
N
CODE SPACECODE
Specifies the blank code for single-byte
characters
Y
Y
N
Summary of Contents for 6100BD - Phaser Color Laser Printer
