Xerox 4595 User Manual Download Page 387

Page: 387 / 502

Xerox 4595 Copier/Printer User Guide

11-25

11. Problem Solving

Unable to Import Scanned Document into Computer

This section describes solutions when unable to import scanned

document into computer.

Unable to find scanner

Cause

The printer is not powered on.

Action

Turn the power on.

Cause

The network cable is disconnected from the

computer.

Action

Connect the network cable to the computer.

Cause

The network cable is disconnected from the machine.

Action

Connect the network cable to the machine.
For information about network settings, refer to the

System Administration Guide.

Cause

The Salutation port is not enabled.

Action

Enable the Salutation port.
For information about network settings, refer to the

System Administration Guide.

Cause

The network connection between the computer and

machine is abnormal.

Action

Check with your system administrator.

Unable to open Mailbox

Cause

No Mailbox has been created.

Action

Create a Mailbox.
Refer to “Local Disk/Mailbox” in the System

Administration Guide.

Cause

Mailbox password forgotten.

Action

Unable to verify password. Set the password to

Off

and then reset the password again.
Refer to “Local Disk/Mailbox” in the System

Administration Guide.

Scanner unable to scan

data due to TWAIN

transmission error

Cause

The scan driver is not installed.

Action

Install the scan driver.

Summary of Contents for 4595























































































































































































































































































































































































































































































































Search results

Summary of Contents for 4595

Reviews:

Brands by name

Popular brands

Xerox 4595, User Manual

Search results

Summary of Contents for 4595

Reviews:

Brands by name

Popular brands