Xerox 4595 User Manual Download Page 268

Page: 268 / 502

Xerox 4595 Copier/Printer User Guide

7-4

7. Paper and Other Media

Load paper in the trays

About types of paper loaded in trays

The machine automatically detects the size and orientation of

loaded paper in trays. The paper type, however, must be set.

Normally, plain paper is set to each of the trays. Change the paper

type settings if you load other paper types. Paper can also be

named and set as user-defined paper. Up to five paper types can

be set as user-defined paper.
For details about changing paper type, refer to "Paper Tray

Attributes" in the System Administration Guide.

About automatic tray selection

Automatic tray selection is active if

Auto

is selected for

Auto

Paper Select (Type)

. If the machine judges that there are two or

more corresponding trays in automatic tray selection, the machine

gives higher priority to the tray having the highest

Paper Type

Priority

set at

Paper Tray Settings

. During automatic tray

selection, trays whose

Paper Type Priority

setting is set to

Off

are not targeted in

Automatic Tray Selection

. Also, if the

Paper

Priority

setting is exactly the same, automatic tray selection is

determined by

Tray Priority

NOTE: Tray 5 (Bypass) cannot be selected in automatic tray
selection.

For information about setting

Paper Type

Paper Type Priority

Paper Tray Priority

, and setting the paper substitute feature, refer

to "Paper Tray Settings" in the System Administration Guide. The

same settings can also be made from CentreWare Internet

Services. See your System Administrator for help.

Load paper in Trays 1 and 2

When the machine runs out of paper during copying or printing, a

message is displayed on the Touch Screen display. Add paper

according to the displayed instructions. Copying or printing is

automatically resumed when paper is added.

Pull out the tray towards you until it stops.

Summary of Contents for 4595























































































































































































































































































































































































































































































































Search results

Summary of Contents for 4595

Reviews:

Brands by name

Popular brands

Xerox 4595, User Manual

Search results

Summary of Contents for 4595

Reviews:

Brands by name

Popular brands