Xerox 4595, User Manual

Page: 258 / 502

Xerox 4595 Copier/Printer User Guide 6-2
6. Stored Programming
2.
Select
Setup Menu
.
3.
Select
Stored Programming
.
Registering a Stored Program
A stored program can record up to 100 features. In addition, up to
58 actions can be registered with a stored program.
One-touch buttons M01 to M20 are provided for Stored Programs
1 to 20.
The procedure below describes the steps to register actions with a
Stored Program.
KEY POINT:
There are two situations where a stored program
may become invalid:
- when default values or paper tray settings are changed in the
system setting
- when buttons are added or removed from the touch screen since
stored programming only remembers the location of a button on
the screen, not the name of the button.
Button positions can change when, after a stored program is
registered, a job flow, job template, or recipient, for example, is
added or deleted.
NOTE: You cannot register System Settings. If the Interrupt
button is pressed, if the Auto Reset feature causes a time-out, or if
a popup window (paper jam, for example) appears, then the
Stored Program record operation is cancelled.