When creating a job in Corel Draw, the text will be set to white and placed on a black background. This same
process can be used in XGW, but the user can also set Laser Routes Background on Raster Images to Yes in the F1,
Engraver Setup.
Air Assist is necessary when laser engraving rubber stamps. A 30 Watt laser will need to make 2 passes to get
enough depth for rubber stamps. (100% Power, 10-15 ips) We recommend a 60 Watt laser or higher for rubber
stamp production.
DIAMOND DRAG (XENETECH DUO LASER ONLY)
When in diamond drag mode for the Xenetech Duo, make all changes to Z
stroke, float, speed as well as the X and Y offsets here. The changes made will
remain in effect for any diamond drag jobs that are sent to the laser until they
are modified. Press any of the values to select them. Use the
and
keys to raise and lower the selected value.
