Xenetech Duo 1218 Installation & Table Manual
29
POINTER
This menu only controls the diode module that points to the work table; this
does not affect the second module that runs the auto focus.
•
Off will turn off the diode module completely.
•
Auto will only run the diode module each time the laser tube fires
•
On will turn on the diode module so that it runs all the time.
UNITS
The measurements on the touch screen can be changed from standard
measurement (inches) to metric (meters). Simply touch the unit of measure
that you wish to use on the touch screen and press
when finished.
MOTTLE
When engraving acrylic, mottle will help achieve a nice smooth surface. Mottle was designed for rastering acrylic
only. This will not have any affect if vector cutting.
•
Frac is the fraction of power that will fire on the space pixels
•
Space is the number of pixels that will be off or fractional power
•
Width is the number of pixels that will fire at full/download power
For example, if you set the following values:
•
Frac 50
•
Space 14
•
Width 3
The laser tube will fire 3 pixels at the full downloaded power. For the next 14 pixels, the laser tube will drop the
power by 50%. After this, the process repeats.
