Xembedded XVME-689-VR7, User Manual

Page: 78 / 94

Rear Transition Module
5-3
Caution
The total cable length for EIDE drives must not exceed 12 inches. Also,
if two drives are connected, they must be no more than six inches apart.
Use the SATA drive interface if longer cabling is required.
Serial ATA hard drive Interface
The use of the XVME 990-VR7 rear transition module, allows for connection to one or two SATA-150
drives
Table 5-2 shows pin out of SATA interface.
Fig. 5-2 SATA connector
Mating connector to connector on the XVME 990-VR7 is Molex 67489-9005
VMEbus
P2 Pin
Row z Signal Name
on P2 SATA connector
on the XVME 990-
VR7 SATA Signal Name
Z1
SATA_TXP0 SATA1 pin-2 Tr
Z2 GND
SATA1 pin-1 GND
Z3 SATA_TXN0 SATA1 pin-3 Transmit -
Z4 GND SATA1 pin-4 GND
Z5 SATA_RXN0 SATA1 pin-5 R
Z6 GND SATA1 pin-7 GND
Z7 SATA_RXP0 SATA1 pin-6 Receive -
Z8 GND
Z9 SATA_TXP1 SATA2 pin-2 Tr
Z10 GND
SATA2 pin-1 GND
Z11 SATA_TXN1 SATA2 pin-3 Transmit -
Z12 GND SATA2 pin-4 GND
Z13 SATA_RXN1 SATA2 pin-5 R
Z14 GND
SATA2 pin-7 GND
Z15
SATA_RXP1 SATA2 pin-6 Receive -