![background image](http://html1.mh-extra.com/html/xantrex/xw4024-120/xw4024-120_operation-manual_3457017062.webp)
Configuration
3–24
975-0240-01-01
Setting the Device Name
The “Dev Name” setting allows you to customize the name of the XW Inverter/
Charger as it is displayed on other screens and menus.
The characters available are:
•
A to Z
•
a to z
•
0 to 9
•
space.
To customize the XW Inverter/Charger name:
1. On the device setup menu, select Advanced Settings.
If “Basic Settings” appears instead of “Advanced Settings” on the device
setup menu, display “Advanced Settings” by pressing Enter + Up arrow +
Down arrow at the same time.
2. Select the Multi-Unit Config menu.
3. Select Dev Name.
4. Press Enter.
The last letter of the XW Inverter/Charger name is highlighted.
5. Begin customizing the device name.
•
To change the character, press the up or down arrow button. Holding
down the button causes the characters to scroll more quickly.
•
To delete the character, press Exit.
•
To add characters, press Enter.
6. When the correct character is shown, press Enter to select it.
7. After pressing Enter to select the last character of your customized device
name, press Enter again to return to the menu.
Note:
Increasing the number of characters in a device name may cause other text on the
same line to run off the edge of the screen. Device names should be limited to 10
characters or less.
Summary of Contents for XW4024-120
