Xantrex XW4024-120, Operation Manual

Page: 37 / 112

Monitoring Operation with the XW System Control Panel
975-0240-01-01 2–15
Table 2-2 Meters Screen
Screen Item Description
AC1 AC input power connected to the XW Inverter/Charger AC1 terminals, in Watts and Volt-Amps.
AC1 is assumed to be connected to the utility grid, but can be connected to any other 240 Vac
source.
AC1 in L1 AC input voltage and current connected to the XW Inverter/Charger AC L1 terminals. This input
voltage display may drift slightly before the inverter has synchronized to the grid.
AC1 in L2 AC input voltage and current connected to the inverter’s AC L2 terminals. This input voltage
display may drift slightly before the inverter has synchronized to the grid.
AC2 AC input power connected to the XW Inverter/Charger AC2 terminals, in Watts and Volt-Amps.
AC2 is assumed to be connected to a generator, but can be connected to any other 240 Vac source.
AC2 in L1 AC input voltage and current supplied to the inverter/charger from the AC2 L1 input. This meter
indicates the inverter/charger is drawing power from the generator to charge the battery or power
the AC loads.
AC2 in L2 AC input voltage and current supplied to the inverter/charger from the AC2 L2 input. This meter
indicates the inverter/charger is drawing power from the generator to charge the battery or power
the AC loads.
Load Power Power consumed by the AC loads, in Watts and Volt-Amps.
Load L1 AC voltage and current supplied from L1 to the AC loads.
Load L2 AC voltage and current supplied from L2 to the AC loads.
State Operating state of the XW Inverter/Charger. For more information, see Table 2-1 on page 2–12.
DC Charging current and battery voltage.
Batt Temp Battery Temperature, as read by the BTS. If the BTS is not installed, this reads “NotAvailable.”