![background image](http://html1.mh-extra.com/html/xantrex/xw4024-120/xw4024-120_operation-manual_3457017031.webp)
Monitoring Operation with the XW System Control Panel
975-0240-01-01
2–9
System Status Screen
The System Status screen appears after the Startup screen. The System Status
screen displays aggregated status information for the entire power system. For
example, a single system may have three Xanbus™ network-connected XW
Inverter/Chargers, two XW Solar Charge Controllers, one XW-Automatic
Generator Start module and one XW System Control Panel all connected to a
single battery bank, a single generator and a common utility grid.
The System Status screen always features a “Menu” arrow pointing to the Enter
button. Pressing Enter takes you to the Select Device menu. For more
information, see “Reading the System Status Screen” on page 2–11.
Figure 2-3
System Control Panel
Top Level
Screens
Startup screen
System
Status screen
System Status
Select Device
menu
Select Device
XW
Inverter/Charger
Home screen
XW6048:Home
Device 2
Home screen
Device 2:Home
Device 3
Home screen
Device 3:Home
Device n
Home screen
Device n:Home
Appears for a few seconds after the system starts up
or when the system has been reset.
Press Enter to view
Select Device menu.
Select device from list
and press Enter to view
Device Setup menu.
Press Enter from a Device Home screen
to view the Device Setup menu.
The number of Home screens depends on
the number of Xanbus-enabled devices
installed in the system.
Important:
If you are uncertain which System Control Panel screen or menu you are
viewing, you can always return to the starting point—the System Status screen—by
pressing Exit repeatedly until the screens stop changing.
Summary of Contents for XW4024-120
