Xantrex XW4024-120, Operation Manual

Page: 76 / 112

Troubleshooting
4–10 975-0240-01-01
Faults and Warnings
When a fault or warning message appears on the System Control Panel, you can
acknowledge the message to clear the screen. To acknowledge a fault or warning
message, press the Enter button. This action does not clear the fault or warning
condition, so you should consult Table 4-2 and Table 4-5 for suggested actions
after you have acknowledged the message. Refer to the
System Control Panel
Owner’s Guide for more information on faults and warnings.
Warning Messages
Warning messages appear on the XW System Control Panel to alert you to an
impending system change. You can view 20 most recent warning messages using
the System Control Panel Warning Log, accessible from the View Device Info
menu. Each warning has a time stamp to let you know the date and time that the
warning appeared.
If several warning messages occur before you can acknowledge or clear them,
they are displayed together on a warning list. This list contains messages from
every Xanbus-enabled device, not just the XW Inverter/Charger. You can select a
message and view its details from warning list.
To view a message from a warning list:
1. On the list, use the up arrow or down arrow button to highlight the message
you want to view.
2. Press Enter.
The complete message appears.
After viewing the message, you can return to the warning list by pressing Exit or
continue to the menu for the device that caused the fault by pressing Enter. Each
time you return to the list after viewing a complete message, the viewed message
is removed from the list.
If you have left the warning list, you can view them at any time from the System
Settings menu.
To view a fault list:
1. On the Select Device menu, highlight System and press Enter.
2. On the System Settings menu, highlight View Warning List.
3. Press Enter.