Xantrex XTR6-110, XTR8-100, XTR12-70,, Operating Manual

Page: 33 / 274

Step 1: Inspecting and Cleaning
975-0200-01-01 2-3
2
Step 1: Inspecting and Cleaning
Initial Inspection
When you first receive your unit, perform a physical check:
1. Inspect the unit for any scratches and cracks, broken switches,
connectors or displays.
2. For the XTR 850 Watt only, ensure that the packing box contains the
7.5 foot (2.5 m) power cord. (The XTR 1700 Watt is not supplied
with a power cord.)
3. If you see external damage or suspect internal damage, contact
Xantrex Customer Service (see Contact Information on page iii) for
an assessment. If the unit is damaged, save all packing materials and
notify Xantrex Customer Service immediately. See packing
instructions in “Return Procedure” on page WA–4.
Periodic Cleaning
The power supply only requires periodic cleaning, not routine servicing.
Whenever a unit is removed from operation, clean the metal surfaces with
naptha or an equivalent solvent, and clean the front panel with a weak
solution of soap and water. Use low-pressure compressed air to blow dust
from components on the printed circuit boards.