Xantrex Freedom HF Owner'S Manual Download Page 5 | Manualshive

Page: 5 / 58

background image

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THIS

O

WNER

’

S

G

UIDE FOR FUTURE

REFERENCE

.

This chapter contains important safety instructions for the
Freedom HF Inverter/Charger (Freedom HF). Each time, before
using the Freedom HF, READ ALL instructions and cautionary
markings on or provided with the inverter/charger, the batteries,
and all appropriate sections of this guide.

NOTE

: The Freedom HF contains no user-serviceable parts. See

Warranty online for guidance.

DANGER

ELECTRIC SHOCK HAZARD

• Do not expose the Freedom HF to rain, snow, spray, or bilge water. This

inverter/charger is designed for marine applications only when additional drip
protection is installed in certain orientations. See the installation guide for
information.

• Do not operate the inverter/charger if it has received a sharp blow, been

dropped, has cracks or openings in the enclosure including if the fuse cover
has been lost, damaged, or will not close, or otherwise damaged in any other
way.

• Do not disassemble the inverter/charger. Internal capacitors remain charged

after all power is disconnected.

• Disconnect both AC and DC power from the inverter/charger before

attempting any maintenance or cleaning or working on any circuits connected
to the inverter/charger. See note below.

• Do not operate the inverter/charger with damaged or substandard wiring.

Make sure that all wiring is in good condition and is not undersized.

Failure to follow these instructions will result in death or serious
injury.

NOTE

: Turning off the inverter/charger using the on/off switch on the front panel

will not reduce an electrical shock hazard.

975-0390-01-01

5

«
...
3
4
5
6
7
...
»

Summary of Contents for Freedom HF



























































Reviews:

No comments

Related manuals for Freedom HF

Stratophonic SC3

Brand: Harman Kardon Pages: 6

HUBNER BERLIN POG 10 + DSL

Brand: Baumer Pages: 36

Brand: NEXENTRO Pages: 8

Brand: Baja Silueta Pages: 99

Brand: Delta Electronics Pages: 2

CONSONANCE REFERENCE DB1

Brand: Opera Pages: 3

INTERNATIONAL TRAVEL ADAPTER

Brand: Igo Pages: 1

Brand: Patton electronics Pages: 11

Parallel Port Input/Output Converter PPIO

Brand: B&B Electronics Pages: 34

Brand: ifi Pages: 2

Brand: Soundfield Pages: 13

Brand: Thor Broadcast Pages: 9

Brand: M-system Pages: 4

Brand: Audio Nemesis Pages: 10

Vizionlink PCIE-VL-3120

Brand: TechNexion Pages: 2

Brand: J-Tech Digital Pages: 11

Brand: Black Box Pages: 2

Brand: Spatz Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands