manualshive.com logo in svg

Xantrex 807-1055, Owner'S Manual

Share
Download
Xantrex 807-1055 Owner'S Manual Download Page 4

ii

Freedom HFS Owner’s Guide

About This Guide

Purpose

The purpose of this Owner’s Guide is to provide

 

explanations and 

procedures for operating, maintaining, and troubleshooting a Freedom HFS 
Sine Wave Inverter/Charger for Recreational, Fleet Vehicle, or Marine 
installations. 
For complete information to help in installing a Freedom HFS Sine Wave 
Inverter/Charger see the Freedom HFS Sine Wave Inverter/Charger 
Installation Guide (Doc. Part Number: 975-0726-01-01).

Scope

The Guide provides safety and operating guidelines as well as information 
on configuring the inverter/charger. It also provides information about 
troubleshooting the unit. It does not provide details about particular brands 
of batteries. You need to consult individual battery manufacturers for this 
information.

Audience

The Guide is intended for users and operators of the Freedom HFS Sine 
Wave Inverter/Charger. 

Related Information

You can find more information about Xantrex products and services at 

www.xantrex.com

.

NOTE

: The Installation Guide (Document Part Number: Freedom HFS 

Sine Wave Inverter/Charger Installation Guide (Doc. Part Number: 975-
0726-01-01)) is intended for qualified personnel. Qualified personnel have 
training, knowledge, and experience in:
•

Installing electrical equipment (up to 1000 volts).

•

Applying all applicable installation codes.

•

Analyzing and reducing the hazards involved in performing electrical 
work.

•

Selecting and using Personal Protective Equipment (PPE).

Freedom HFS IC Owners Guide.book  Page ii  Friday, September 11, 2015  2:54 PM

Summary of Contents for 807-1055



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands