Xantrex 807-1055, Owner'S Manual

Page: 26 / 58

12 Freedom HFS Owner’s Guide
Freedom Inverter/Charger Configuration
To change the charger’s charging current setting:
By default the charging current is set to  .
1. Press and hold the Inverter Power button for five seconds.
The LED screen will flash “  ” intermittently.
2. Press the Select button once.
The LED screen will display the present charging current
setting. For example, “
 ” for a 35 A setting.
3. Press the Select button again to change to the next setting.
The LED screen shows the next setting. Example, “  ” for a
5 A setting.
AC Input Circuit
Breaker or fuse size
(Amps)
Charger DC Current
Setting (Amps)
Maximum AC
Pass-through Current
Available (Amps)
15  12.5
 9.5
 4.0
 0
4. Continue pressing the Select button to cycle through each of the
available settings – “  ”, “  ”, “  ”, and “  ” until you
reach the desired setting.
5. Press and hold the Select button for five seconds to make the
setting permanent.
To change the inverter mode setting:
By default the inverter mode is set to ON (“  ”).
1. Press and hold the Inverter Power button for five seconds.
2. Press the Inverter Power button until the LED screen flashes
“  ” intermittently.
3. Press the Select button once.
The LED screen will display the present (or most recent)
inverter mode setting.
 Inverter mode setting is ON with Power
Save feature
 Inverter mode setting is ON without Power
Save feature
 Inverter mode setting is OFF
4. Continue pressing the Select button to cycle through the three
settings – “  ”, “  ”, and “  ” until you reach the desired
setting.
5. Press and hold the Select button for five seconds to make the
setting permanent.
Freedom HFS IC Owners Guide.book Page 12 Friday, September 11, 2015 2:54 PM