manualshive.com logo in svg

Xantrex 807-1055, Owner'S Manual

Share
Download
Xantrex 807-1055 Owner'S Manual Download Page 30

16

Freedom HFS Owner’s Guide

Freedom Inverter/Charger Operation

Display Panel Operation

The Freedom HFS features a display panel with three-digit LED 
display to show inverter, AC source, and battery status information.

4

1

2

3

See NOTE in Feature # 4.

Feature Description

1

Inverter Power button

•

Press and hold for one second to turn the Freedom HFS’s 
inverter operation ON or OFF (when AC Shore Power is 
NOT present).

•

Press and hold for five seconds to adjust feature settings. 
Go back to page 11 for instructions.

2

Three-digit LED display screen

 shows status information 

and detected fault codes. Upon startup, the screen shows the 
display board (



.

) and main board (



.

) firmware 

versions.

3

Status LED

 Indicates the mode of operation with a three-

color LED. 
•

Green

 pertains to 

Utility

 status.

• Solid indicates the Freedom HFS is in shore power 

mode and battery is fully charged.

• Flashing indicates the Freedom HFS is in shore power 

mode and the unit is currently charging the battery.

•

Yellow

 pertains to 

Battery

 status.

• Solid indicates the Freedom HFS is in inverter 

operation and using the battery to provide AC power.

• Flashing indicates the Freedom HFS is in inverter 

operation but AC shore power is detected thus 
transferring to shore power mode within 20 seconds.

•

Red

 indicates that a 

Fault

 condition has been detected 

and the Freedom HFS has shut down. See 
“Troubleshooting Reference” on page 33.

Feature Description

Freedom HFS IC Owners Guide.book  Page 16  Friday, September 11, 2015  2:54 PM

Summary of Contents for 807-1055



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands