Xantrex 807-1055, Owner'S Manual

Page: 21 / 58

975-0727-01-01 7
Features
Display Panel (All Models)

4
1
2
3
Feature Description
1 Inverter Power button is the main unit switch that turns the Freedom HFS’s
inverter mode ON or OFF. See page 16 for additional information.
2 Three-digit LED display screen shows status information and fault codes.
See page 16 for additional information.
3 Status LED indicates the mode of operation with a three-color LED. See
page 16 for additional information.
4 Select button changes status information displayed on the display screen. See
page 16 for additional information.
IMPORTANT : See “Display Panel Operation” on page 16 for detailed information on operating
the panel’s buttons.
Remote and Power Module Panel

(EMS Models)
2
1
Feature Description
1 Remote jack is used for connecting the Display panel that ships with the
Freedom HFS 1055 120VAC EMS (PN: 807-1055-02) and Freedom HFS
2055 120VAC EMS (PN: 807-2055-02). Each shipment comes with a 25-foot
communications cable as well.
2 Power module has one fuse and three contacts for wires that connect to:
• an auxiliary 12-volt DC OUT terminal,
• an Ignition Control terminal, and
• a Disabled terminal.

NOTE
: The Ignition Control and Disabled terminals are connected
by a jumper wire that acts to disable ignition control. Removing the
jumper wire will enable ignition control.
For instructions on how to enable or disable Ignition Control, see the
Installation Guide.
Freedom HFS IC Owners Guide.book Page 7 Friday, September 11, 2015 2:54 PM