Xact Hosted PBX User Manual Download Page 65

Page: 65 / 92

Pick up your phone handset.

Dial the Call Pickup access code: *11.

Alternatively, if two or more phones are ringing and you want to pick up the call that is ringing on a particular

extension number, follow these steps:

Pick up your phone handset.

Dial the Directed Pickup access code: *12.

Dial the extension number on which the call is ringing.

16.3

Multiple Appearance Directory Numbers

If your phone line is in a Multiple Appearance Directory Number group then there will be an entry in the

Group Membership

section for it called

MADN ….

Click on this entry to view that Multiple Appearance

Directory Number:

The following information is shown:



What department this Multiple Appearance Directory Number is in, if any. If your business does not use

departments then this will say

None



How many lines are in the group.



The lines which are in this group. Your line will be in this list.

Only an administrator can make changes to a Multiple Appearance Directory Number group.

Summary of Contents for Hosted PBX





























































































Search results

Summary of Contents for Hosted PBX

Reviews:

Related manuals for Hosted PBX

Brands by name

Popular brands

Xact Hosted PBX, User Manual

Search results

Summary of Contents for Hosted PBX

Reviews:

Related manuals for Hosted PBX

Brands by name

Popular brands