Xact Hosted PBX User Manual Download

Page: 55 / 92

Select the individual or group of callers that this rule will apply to and click the “

Next

”

button.

Next you will select how the

system will route your calls when you receive a call from selected user or group. The available routing

options are:

Ring your phone with a standard or distinctive ringtone

Send the call to voicemail

Inform the caller that I am unavailable and reject the call

Prompt the caller to record their name then prompt you to accept or reject the call

Ring more than one phone simultaneously or in sequence

Prompt the caller to record their name then ring more than one phone and prompt you to accept or reject

the call.

To have the system route calls to one or more phones, select the appropriate option, click the “

Next

” button

and follow the steps below.

Summary of Contents for Hosted PBX





























































































Search results

Summary of Contents for Hosted PBX

Reviews:

Related manuals for Hosted PBX

Brands by name

Popular brands

Xact Hosted PBX, User Manual

Search results

Summary of Contents for Hosted PBX

Reviews:

Related manuals for Hosted PBX

Brands by name

Popular brands