Xact Hosted PBX User Manual Download Page 63

Page: 63 / 92

The following information is shown:



What department this Multi Line Hunt Group is in, if any. If your business does not use departments

then this will say

None



How many lines are in the group, and how many are logged in.



Whether you are currently logged in.



The lines which are in this group and whether each line is currently logged in. Your line will be in this

list.

16.1.2

Using Multi Line Hunt Groups

Calls that come into your phone line from a Multi Line Hunt Group will ring your phone as normal, and you

can answer the calls as you usually would.

If you have permissions to log in and out of the Multi Line Hunt Group you can either use CommPortal to log

in and out, or you can use your phone.

Using Your Phone

To log into a Multi Line Hunt Group using your phone, follow these steps:

Pick up your phone handset.

Dial the Multi line Hunt Group login access code: *321 followed by the number of the Multi Line Hunt

Group.

To log out of a Multi Line Hunt Group using your phone, follow these steps:

Pick up your phone handset.

Summary of Contents for Hosted PBX





























































































Search results

Summary of Contents for Hosted PBX

Reviews:

Related manuals for Hosted PBX

Brands by name

Popular brands

Xact Hosted PBX, User Manual

Search results

Summary of Contents for Hosted PBX

Reviews:

Related manuals for Hosted PBX

Brands by name

Popular brands