20
2)
Verify that you are using the correct charger for your vehicle,
and that the charger input power is compatible the “house
current” in your area.
3)
Keep the charger and battery away from water to prevent
electrical shock and shorting. The charger is intended for use in
a covered dry area only.
4)
Plug the end of the charger’s cord into the socket of the
adaptor
first. Next connect the adaptor to the XB-420M (the charger port
in located below the front of the seat). Then plug the chargers’
AC cords into the wall outlet.
5)
Read the charger label to learn about the charger indicator lights,
and their meanings.
6)
Generally, a short drive will require a short time to re-charge,
and a long ride will require a longer time. A complete (90%)
discharge may require 6 hours to recharge. To prevent
electrolysis (battery fluid loss by hydrogen generation,) do not
charge for longer than eighteen hours.
Before riding the electric scooter for the first time, you must charge the
batteries for 4-6 hours using the supplied charger. To charge, pull the
protective cover from the charging sockets. Then plug the charger into
the charging socket, and plug the charger into a wall outlet.
IMPORTANT
The electric bike is powered by four 12V/20Ah batteries wired in series
to provide 48 volts of potential. All batteries charge simultaneously. You
should charge your XB-420M after each ride. You should charge your
XB-420M if it has not been used for 30 days or more.
WARNING
Do not place the battery near heat or fire. Do not expose the chargers to
water.
Summary of Contents for XB-420M
Page 40: ...39 ...
Page 41: ...40 Wiring Diagram See notes above ...
Page 42: ...41 Controller Wiring Diagram ...