16
4)
Make sure the XB-420M is in good mechanical order. Visually
inspect and hand-check the vehicle, and snug any loose bolts,
screws, and electrical terminals.
B) Steps to Startup
1)
Confirm adjustment of the Rear View Mirrors so that you can
see clearly behind you.
2)
Insert the key into the key switch and turn the key from OFF to
ON.
3)
The XB-420M has an onboard Voltmeter, indicating the
Battery’s approximate state-of-charge. It is normal for this
reading to “sag” somewhat during acceleration. Excessive
Voltage “sag” is a sign of a depleted or damaged battery. When
a battery is exhausted, if you force it to supply energy, it will
dramatically damage the battery. At this time, the low-voltage
protector will shut off the power automatically, protecting the
battery from further damage.
4)
Lights: Light switch is located on the right side of the handle
bars and can be controlled by thumb. Push to center position for
driving lights and to the left position for the headlight.
5)
Hold onto the handlebars with both hands. Assume a well-
balanced position. Your right hand will control the throttle.
Twist the throttle slowly to avoid a sudden rush of speed
forward. The speed of the bike will increase as you twist the
throttle. Release the throttle and apply the brakes to stop your
bike. You will control the speed of the bike by using the throttle
and speed control toggle switch along with the brakes. When the
brake handle is squeezed it cuts power to the accelerator.
6)
Give the XB-420M some throttle and gradually increase the
speed control toggle switch to adjust maximum speed. Try not
to brake and accelerate needlessly.
7)
Return the key to the OFF position and take out the key after
riding, to secure your property and to save battery power.
Summary of Contents for XB-420M
Page 40: ...39 ...
Page 41: ...40 Wiring Diagram See notes above ...
Page 42: ...41 Controller Wiring Diagram ...
