M A - 5 Q C S P E C T R O P H O T O M E T E R
24
8. After the measurement(s) is completed, the data results selected in the Setting menu are shown on the
screen. Swipe the top of the screen to the left to alternate between L*a*b* and L*C*h° data. To exit the
results screen, tap the Left (
◄
) arrow at the bottom of the screen. To start a new measurement, tap the
Right (
) arrow at the bottom of the screen or press the Measure button.
Viewing Measurement Data
Lab data can be viewed for each basic measurement.
1.
Tap the desired job from the list on the measurement screen.
2.
Tap
Show Results
to view the data. Swipe the top of the screen to the left to switch between L*a*b* and
L*C*h° data.
3.
Swipe the screen up or down to view previous or next measurement sample data.
4.
Tap the
Left (◄) arrow at the bottom of the screen to return to the Measurements screen
.
Indicates the Data Mode that was
selected when measured.
indicates Illumination/Observer Angle and
sample temperature when measured.