M A - 5 Q C S P E C T R O P H O T O M E T E R
11
USER INTERFACE
Navigating the Screen
The instrument features a graphical touch screen display. All functionality is accessed directly through the
screen.
Scrolling through Settings and Jobs
The Up (
▲
) and Down (
▼
) arrows appears on screens when some settings, standards, etc. cannot be accessed
from the main view. You can also swipe the screen up or down to view the additional settings, etc.
The Left (
◄
) arrow at the bottom of the screen is used to return the screen to the previous view.
Settings and jobs are accessed by tapping the corresponding icon on the Home screen. For this example, the
Settings icon was tapped to open the Settings screen.
Measure Button
The measure button (1) is located on the side of the instrument. This is the same button that is used to power on
and off the instrument. You can also tap the screen (2) to initiate a measurement.
NOTE
: In case of a firmware crash, this button acts
as a RESET button. Remove the USB cable, press
and hold the button for 10 seconds and then release.
The instrument will turn off. Refer to the
Troubleshooting section for additional information.
(1)
(2)
