M A - 5 Q C S P E C T R O P H O T O M E T E R
15
Operation Mode
This option is used to set auto measure mode.
Manual Measure:
When set to Manual,
you must press the Measure button or tap the screen once all three
contact sensor indicators turn green in the display to take a measurement.
Automatic Measure:
When set to Automatic,
this option allows the instrument to automatically take a
measurement once all three contact sensor indicators turn green in the display. No measurement button press
or screen tap is required. Once a measurement is taken, the instrument must be repositioned or the screen
tapped for the next measurement.
Dark Mode
This option is used to help reduce measurement noise on very dark sample measurements.
Measurement times increase from 2.7 to 4.2 seconds when activated.
Off:
When set to off,
the option is not utilized.
Automatic:
When set to Automatic (default setting), the instrument automatically switches to dark mode after a
dark sample is detected.
Speaker Mode
This option is used to turn the instrument speaker on or off. When set to on, the instrument beeps after
a measurement and calibration.
WiFi Mode
This option is used to turn WiFi on/off and setup the selected WiFi network.
Off:
When set to off,
WiFi is turned off (saving battery power). WiFi can still be activated by clicking the “WiFi
Connect” icon on the Home screen.
On:
When set to on,
WiFi is turned on during normal operation and standby. WiFi is turned off during deep sleep
mode.
WiFi Setup:
Tapping the button will cause the instrument to scan for available network. After scanning the
available networks are displayed on the screen. Tap a desired network and setup the password if required.
When finished, tap OK to select the WiFi network.
Reset WiFi:
Tapping the button will reset the WiFi to its default setting.
Available
networks
Rescan for available networks
