M A - 5 Q C S P E C T R O P H O T O M E T E R
21
3.
When ready, tap
Calibration
and then tap
Yes
to start calibration. Do not touch the instrument throughout
the measurement sequence.
NOTE:
If an error message appears after white calibration, try measuring the white tile again. If an error still
occurs, clean the white calibration tile as explained in the Appendices. If the issue persists, perform Factory
Reset in the Settings menu, turn the device off and on and repeat the calibration.
4.
After calibration is completed, remove the instrument from the calibration reference and close the reference
case.
NOTE:
It is recommended to perform a Self-Test after the Calibration Refer to the Settings screen.
Current calibration
status
