X - R i t e e X a c t ™ I n s t r u m e n t
61
The following functions are preset and cannot be changed.
G7 Job
Paper QC: Color Space CIE L*a*b* is preset to CIE L*a*b*
Gray Balance QC: Display is preset to
Δ
L*,
Δ
E*,
Δ
F
TVI Table Setting: Spread is preset to All
PSO Job
Paper QC: Color Space CIE L*a*b* is preset to CIE L*C*h°
Gray Balance QC: Display is preset to
Δ
L*,
Δ
a*,
Δ
b*,
Δ
E*
TVI Table Setting: Spread is preset to Middle
JapanColor Job
Paper QC: Color Space CIE L*a*b* is preset to CIE L*C*h°
Gray Balance QC: Display is preset to
Δ
L*,
Δ
a*,
Δ
b*,
Δ
E*
TVI Table Setting: Spread is preset to Middle
Reviewing/Editing Job Parameters
Job functions and settings are normally assigned within the selected job tool that is downloaded
to the instrument.
1.
Tap and hold the Job tool icon
on the main menu screen to access the tool edit screen.
NOTE:
The tool settings can also be accessed by tapping the triangle icon in the status bar
when the tool is selected.
OR
2.
Tap the Active Functions button to review/edit functions that are available during a
measurement.
3.
Swipe the screen to the left or right to access the active function list for the different patch
types: Paper, Solid, Tint, Overprint and Gray Balance.
4.
To activate a function for the selected patch, tap the empty box to add a checkmark. To
deactivate a function, tap the “checked” box to clear checkmark. Swipe the screen up or down
to view additional functions. Refer to the Measurement Functions section earlier in this manual
for a description of all functions. For information on “Job only” functions, refer to Additional
Job Functions section later in this manual.
