X - R i t e e X a c t ™ I n s t r u m e n t
46
BestMatch Table
(Job tools only, Solid functions)
This job function has a table which views the BestMatch results of all colors of a job at once.
Each row in the table represents a different solid ink used in that job (table will scroll down if
there are more solids than can fit on a single screen). First in each row is a color patch
representing which ink, followed by two delta E values (1
st
current sample, 2
nd
adjusted delta E).
Finally, on each row it shows the recommended density (thickness) adjustment.
BestMatch Function Setting
Tap the BestMatch button and set the type of substrate that is used for BestMatch measurements.
Options are: Uncoated and Coated.
BestMatch Table Measurement
1.
Measure the solid patches.
2.
View results.
Inks QC
(Job tools only, Overprint and Solid functions)
This is a job function where the left half of the display is the density response(s) of the current
ink for the patch being measured. For solid inks, only a single density will be shown. For an
overprint density responses for each ink of the patch will be shown. The right half displays Delta
Lab values, as well as the configured Delta E value.
Inks QC Measurement
1.
Measure solid or overprint patch.
2.
View results.
TVI Table
(Job tools only, Tint functions)
This is a job function that has a table to view the TVI (Tone Value Increase, also called dot gain)
results of the last tint measurements of a job at once. Additionally, it shows spread values
between the process inks (CMY).
Simulated patch standard
Function, status, illum/obs,
and Measurement Condition
selected
Simulated color of sample
Simulated patch standard
Function, status, illum/obs,
and Measurement Condition
selected
Simulated color of sample
Pass/fail/warning indicators
