X - R i t e e X a c t ™ I n s t r u m e n t
15
Connecting the Power Supply
The power supply can be connected directly to the instrument or to the docking station. The
docking station is convenient for storing and charging the instrument when not in use.
Verify the voltage indicated on the AC adapter complies with the AC line voltage in your area.
Operational hazard exists if an AC adapter other than X-Rite SE30-177 is used.
AC Adapter Ratings,
Input: 100-240V 50-60 Hz, Output: 12VDC @ 2.5A
Instrument Connection
1.
Insert the small plug from the power supply into the input connector on the instrument (1).
2.
Plug the detachable line cord in the power supply and plug the line cord into the wall
receptacle.
Docking Station Connection
1.
Turn the docking station over and feed the small plug from the power supply through the
strain relief (1) in the middle of the station.
2.
Plug the small plug into the input connector (2). The power supply cable can be feed out any
side of the docking station at the bottom.
3.
Plug the detachable line cord in the power supply and plug the line cord into the wall
receptacle.
4.
Position the instrument on the docking station to charge.
(2)
(1)
(1)
