X-Rite COLOREYE XTH, Operation Manual

Page: 15 / 64

1-11
INSTALLATION
To install the Targeting Foot, proceed as follows:
1. Locate the targeting foot in the carrying case.
2. Insert the targeting foot alignment tabs into the alignment slots on the instrument.
You will hear the targeting foot snap into place. Refer to Figure 1-10.
Figure 1-10. Installing the Targeting Foot
3. Lock the foot into place as shown in Figure 1-11.
Figure 1-11. Locked Targeting Foot
4. The Targeting Foot is installed.
Targeting Foot
Alignment Tabs
Instrument
Alignment Slots
Targeting Foot Locked
(to the far right)