wtw Oxi 170, Operating Instructions Manual

Page: 28 / 64

Operation Oxi 170
90 ba24105e08 11/2010
4.5.2 Setting table of parameterization
Overview of the settings
(main level)
x Menu appears for the corresponding instrument variant
1)
With salt content correction activated
2)
For relays that are configured as limit indicators
General operating
instructions
The starting point for the settings is the start display of the
parameterization level (see section 4.5.1):
Operation:
z
Navigate in the main level to the next or previous setting with
<UP><DOWN> . The entry level with further settings is reached by
subsequently pressing <ENTER> .
z
In the entry level select the desired value from the selection in each
case with
<UP><DOWN> and confirm this with <ENTER> . This puts
the setting into effect and you go to the next setting or return to the
main level.
z
Certain settings or choices depend on the instrument variant or
Display Description
Instrument version
Stan-
dard RT RT RS
PSA
Salinity equivalent
1)
x x x
Pr1
Current output 1 x x x
Pr2
Current output 2 x x
PL
Relay limits
2)
x x
PPr
Air pressure x x x
PAL
Site altitude x x x
PIF
RS 485 interface x
PCd
Password protection x x x
Pt
Temperature balancing x x x
PCS
Timer function x x
Switch to the first setting of the
main level with
<ENTER> .
A P