wtw MultiLab P5, Operation Manual

Page: 174 / 251

Documentation Documentation
174
A61101/08.00/IWa/MLP5-E2 BA61101/08.00/IWa/MLP5-E2
175
Oxygen independent on the position of selector switch!
Command Function
CCON Measure the oxygen concentration
O2 22.02.94 09:19:40 * 8.6 mg/L 21.9 °C
MLP5 >
CPO2 Measurement of oxygen partial pressure
O2 22.02.94 09:19:40 * 168 mbar 21.9 °C
MLP5 >
CSAT Measurement of saturation
O2 22.02.94 09:19:40 * 107 % 21 °C
MLP5 >
RCAL Read out the calibration data
OxiCal 01.01.00 00:00:00 1.000 Srel 20.0 °C
MLP5 >
RBNR Read-out of the BOD5 samples
22.02.94/01
MLP5 >
RBPR
sample Read-out of BOD5 -analysis for sample. Format see
BOD5- measurement.
Error message
INVALID COMMAND Wrong or not interpretable command
Print format of test values
Printer 80 characters/line or interface command format
3 characters serial number or identification no.
(is dropped in case of interface command)
1 space
(is dropped in case of interface command)
5 characters method indication
1 space
17 characters date and time
1 space
3 characters special signs: ! (for sample blank value or offset
correction), F (for slope correction),* (for measurements out of the
meas. range)
1 space
9 characters test value
1 space
8 characters unit
1 space
5 characters indication form
1 space
4 characters temperature (not for photometric measurements)
1 space
2 characters °C (not for photometric measurements)
Data transmission
Baud rate 1200
Data bits 8
Stop bits 1
Parity none
Handshake Hardware
max. cable length 15 m
Font IBM, separation by blanks