wtw MultiLab P5, Operation Manual

Page: 157 / 251

Documentation Documentation
156
BA61101/08.00/Pla/MLP5-E2 BA61101/08.00/Pro/MLP5-E3
157
¡
Select funtion
documentation "storage".
¡
Function "Numbers"
selected.
Storage of test values.
¡
Function "no. cont 001"
set.
Test values continuously
numbered from 001 to 999.
001: No current test value
e.g. after RESET or erasure
of test value numbers (s.b.).
112: Next documented
test value
(e.g. no. 112)
after already performed
measurements with set
documentation.
In the test value memory always the last 1000 test-
values are available, not dependent on the current
number of the documented test values.
¡
Set function "number
new".
Function "Number new" selected and confirmed :
Step to selection menu "Erase Number"
¡
Function"Erase number :
no" set.
Test value numbering is
continued after the last
documented test value.
¡
Set function "Erase
number: yes".
Test value numbering
starts again with 001.
Confirm input and quit the
menu "Erase number".
Further action s.b.
Function "Number new" not selected:
¡
Set function "Ident. no."
Before each measurement
input of any 3-digit no (e.g.
customer's code, sample
location, river kilometer).
Note: To switch off the function "ident. No." select the function
"no. cont.".