![background image](http://html1.mh-extra.com/html/wtw/cond-3310-ids/cond-3310-ids_operating-manual_1000586054.webp)
Glossary
Cond 3310 IDS
54
ba77051e04
07/2017
Calibration
Comparing the value from a measuring system (e.g. the displayed
value) to the correct value or a value that is regarded as correct. Often,
this expression is also used when the measuring system is adjusted at
the same time (see adjusting).
Measured parameter
The measured parameter is the physical dimension determined by
measuring, e.g. pH, conductivity or D.O. concentration.
Test sample
Designation of the test sample ready to be measured. Normally, a test
sample is made by processing the original sample. The test sample and
original sample are identical if the test sample was not processed.
Measured value
The measured value is the special value of a measured parameter to be
determined. It is given as a combination of the numerical value and unit
(e.g. 3 m; 0.5 s; 5.2 A; 373.15 K).
Molality
Molality is the quantity (in Mol) of a dissolved substance in 1000 g sol-
vent.
Reset
Restoring the original condition of all settings of a measuring system.
Stability control (Au-
toRead )
Function to control the measured value stability.
Standard solution
The standard solution is a solution where the measured value is known
by definition. It is used to calibrate a measuring system.
Temperature function
Name of a mathematical function expressing the temperature behavior
of a test sample, a sensor or part of a sensor.
Summary of Contents for Cond 3310 IDS
Page 6: ...Contents Cond 3310 IDS 6 ba77051e04 07 2017...
Page 56: ...Index Cond 3310 IDS 56 ba77051e04 07 2017...
Page 57: ......