Operation
Cond 3310 IDS
22
ba77051e04
07/2017
4.4.5 Example 2 on navigation: Setting the date and time
The meter has a clock with a date function. The date and time are indicated in
the status line of the measured value display.
When storing measured values and calibrating, the current date and time are
automatically stored as well.
The correct setting of the date and time and date format is important for the fol-
lowing functions and displays:
Current date and time
Calibration date
Identification of stored measured values.
Therefore, check the time at regular intervals.
Setting the date,
time and date format
The date format can be switched from the display of day, month, year
(
dd.mm.yy
) to the display of month, day, year (
mm/dd/yy
or
mm.dd.yy
).
The date and time are reset to default after a fall of the supply volt-
age (empty batteries).
1.
In the measured value display:
Using
<ENTER_>
, open the
Storage & config
menu.
The instrument is in the setting mode.
2.
Select and confirm the
System
/
Clock function
menu with
<
><
>
and
<ENTER>
.
The setting menu for the date and time opens up.
3.
Select and confirm the
Time
menu with
<
><
>
and
<ENTER>
.
The hours are highlighted.
4.
Change and confirm the setting with
<
><
>
and
<ENTER>
.
The minutes are highlighted.
5.
Change and confirm the setting with
<
><
>
and
<ENTER>
.
The seconds are highlighted.
Date format:
dd.mm.yy
Date:
01.02.14
Time:
14:53:40
Clock function
01.02.2014
08:00
Back
Summary of Contents for Cond 3310 IDS
Page 6: ...Contents Cond 3310 IDS 6 ba77051e04 07 2017...
Page 56: ...Index Cond 3310 IDS 56 ba77051e04 07 2017...
Page 57: ......
