![background image](http://html1.mh-extra.com/html/wtw/cond-3310-ids/cond-3310-ids_operating-manual_1000586051.webp)
Cond 3310 IDS
Firmware update
ba77051e04
07/2017
51
12 Firmware update
12.1 Firmware update for the meter Cond 3310 IDS
You can find available firmware update files for your meter on the Internet. With
the "Firmware Update " program and a PC you can update the firmware of the
Cond 3310 IDS to the newest version.
For the update you have to connect the meter to a PC.
For the update via the USB-B interface, the following is required:
a free USB interface (virtual COM port) on the PC
the driver for the USB interface (on the enclosed CD-ROM)
the USB cable (included in the scope of delivery of the Cond 3310 IDS).
After switching the meter off and on you can check whether the meter has taken
over the new software version (see Y
48).
1.
Install the downloaded firmware update on a PC.
An update folder is created in the Windows start menu.
If an update folder already exists for the meter (or meter type), the new
data are displayed there.
2.
In the windows start menu, open the update folder and start the firmware
update program for the meter
3.
Using the USB interface cable, connect the Cond 3310 IDS to a USB
interface (virtual COM port) of the PC.
4.
Switch on the Cond 3310 IDS.
5.
In the firmware update program, start the update process with OK.
6.
Follow the instructions of the firmware update program.
During the programming process, a corresponding message and a prog-
ress bar (in %) are displayed.
The programming process takes up to 5 minutes. A terminatory mes-
sage is displayed after a successful programming process. The firmware
update is completed.
7.
Disconnect the Cond 3310 IDS from the PC.
The Cond 3310 IDS is ready for operation again.
Summary of Contents for Cond 3310 IDS
Page 6: ...Contents Cond 3310 IDS 6 ba77051e04 07 2017...
Page 56: ...Index Cond 3310 IDS 56 ba77051e04 07 2017...
Page 57: ......