wtw Cond 3310 IDS, Operating Manual

Page: 37 / 58

Cond 3310 IDS Data memory
ba77051e04 07/2017
37
7 Data memory
You can store measured values (datasets) to the data memory:
 Manual data storage (see section 7.1 M
ANUAL STORAGE
, page 37)
 Automatic data storage at intervals (see section 7.2 A
UTOMATIC DATA STOR
-
AGE AT INTERVALS
, page 38)
Each data storage process transmits the current dataset to the interface at the
same time.
7.1 Manual storage
You can store a measurement dataset to the data memory as follows. The
dataset is at the same time output to the interface:
If the memory is full When all memory locations are occupied, it is not possible to continue storing.
Then you can e.g. store the data from the memory to a PC (see section 7.3.1
E
DITING THE MEASUREMENT DATA MEMORY
, page 40) and subsequently erase
the data memory (see section 7.3.2 E
RASING THE MEASUREMENT DATA MEMORY
,
page 41).
1. Press the <STO> key shortly.
The menu for manual data storage appears.
2. If necessary, change and confirm the ID number (1 ... 10000) with
<

><

> and <ENTER> .
The dataset is stored. The meter switches to the measured value dis-
play.
01.02.2014 07:43:33
ϰ
4.7 µS/cm 24.8 °C AR +++
C = 0.475 1/cm, Tref25, nLF
ID number: 1
continue
Manual data storage 4 von 500
01.02.2014
08:00
Back