WS824 WS848-5D Manual Download

Page: 72 / 72

12. The warranty issues

We sincerely thank you for choosing our PBX, and hope that its practical and

reliable superior performance, will bring convenience and efficiency to your work and

life.

The warranty period of this product is one year, and it will be calculated from the

date of purchase.

It is suggested that users keep the purchase vouchers and keep them as warranty

certificates.

The following situations are not within the scope of warranty, and maintenance

fees shall be charged:



The equipment is damaged due to improper operation or transportation by the

user.



The machine has been replaced, dismantled or repaired by itself or has been

repaired at a non-designated maintenance point.



The machine is damaged due to natural disasters such as thunder and lightning,

water damage or fire disaster.



The body number is inconsistent with the warranty file.



Damage caused by abnormal supply voltage.

Charges within the scope of warranty: round-trip postage.

Non - warranty charges: round-trip postage and cost of materials.

Query system hardware version number: #904

xx2xx:

1. The longest voice of night prompt is 120 seconds.

2. The duty extension group can be stored into 8 extensions.

xx3xx:

1. The longest voice of night prompt is 80 seconds.

2. The duty extension group can be stored into 32 extensions.

3. The system supports digital private phone. Different maximum with different

equipment .

WEB:WWW.WS824.ORG TEL:020-85261379 18144823824

Summary of Contents for WS848-5D









































































Search results

Summary of Contents for WS848-5D

Reviews:

Related manuals for WS848-5D

Brands by name

Popular brands

WS824 WS848-5D, Manual

Search results

Summary of Contents for WS848-5D

Reviews:

Related manuals for WS848-5D

Brands by name

Popular brands